Problem Solving
Xerox 4112/4127 Copier/Printer 12-77
User Guide
Staple jams in the staple cartridge
Finisher staple cartridge staple jams
1. Make sure that the machine has stopped printing and then open the front cover on the
finisher.
2. Hold the R1 at the position shown in the diagram and pull straight out of the machine.
3. Pull out the staple cartridge and check the inside of the finisher for any remaining staples.
4. Open the staple cartridge cover and remove the jammed staple.
5. If the jammed staple cannot be removed, push the staple in the direction indicated by
arrow shown in the illustration.
WARNING
Be careful when removing jammed staples to avoid hurting your fingers.
To Next Page
Loading...
Need help?
General
