Xerox 4112 User Manual

Specifications
13-12 Xerox 4112/4127 Copier/Printer
User Guide
Printable Area
Standard Printing Area
The standard area that can be printed leaves a margin of 0.16 inches (0.161 in./4.1 mm) on all
four edges of the paper (for SRA3, 12.6 in./320 mm wide, a margin of 0.45 in./11.5 mm left and
right).
Note
The actual printing area may vary depending on the printer (plotter) control language.
Extended Printing Area
If you choose to extend the printing area in a print, the maximum area for the print is 12.01 ×
18.90 inches (305 × 480mm). The maximum area for a copy is 43.2 × 17.01 inches (297 ×
432mm). The printing area changes depending on paper size used.
Note
To extend the print area, change the PCL print driver or the Print Area setting on the touch
screen.
Note
For information on how to adjust print driver settings, refer to the online help for the print driver.
Note
For more about Control Panel settings, refer to Print Area in the System Administration Guide or
contact your System Administrator.
When the paper width is less
than 12 inches
When the paper width is 12
inches
When the paper width is
12.6 inches
(SRA3 (320 mm width))
Printable
UnPrintable
Printable
UnPrintable
Printable
UnPrintable
Printable
UnPrintable
Printable
UnPrintable
Printable
UnPrintable

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English