Xerox 4112 User Manual

Problem Solving
12-20 Xerox 4112/4127 Copier/Printer
User Guide
Scan Troubleshooting
Note
An optional package may be necessary for this feature. For more information, contact the
Customer Support Center.
Unable to Scan with the Machine
Symptoms Causes and Actions
Document not fed properly
from the document feeder
YES Cause Document size is too small.
Action The minimum size of the document that can be loaded
on the document feeder is A5.
Refer to Loading Documents on page 2-1.
If problem is not solved, go to next Cause/Action.
Cause The right type of document is not being used.
Action The document feeder cannot be used with irregular sized
documents, business cards, transparencies, or thin
documents.
In addition, documents with tags, paper clips, and
cellophane tape cannot be used.
Refer to
Loading Documents on page 2-1.
If problem is not solved, go to next Cause/Action.
Cause The document guides are in the incorrect position.
Action Set the document guides to correctly match the
document size.
Refer to Loading Documents on page 2-1.
If problem is not solved, go to next Cause/Action.
Cause Part of the document is ripped and a piece of paper
remaining in the document feeder.
Action Open the document feeder cover and remove the piece of
paper.
Refer to Document jams on page 12-73.
If problem is not solved, go to next Cause/Action.
Cause Documents of different sizes are set.
Action When using documents of different sizes you must
specify Mixed Size Originals, otherwise, a paper jam will
result. When setting documents of different sizes, be sure
to specify Mixed Size Originals.
Refer to Mixed Size Originals on page 2-27.

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English