Copy
Xerox 4112/4127 Copier/Printer 2-17
User Guide
2. From the Hole Punch & More screen select the applicable output features from the Hole
Punch & More screen:
• Paper Supply (The Paper Supply screen is displayed.)
• Collation feature
• Add Tab Stock
• Separator Tray
• Staple (Available only when Collated is selected)
• Hole Punch (Available only when Collated is selected)
• Output/Offset Stacking
3. Select Save to save the changes.
Image Shift
Image shift features are defined by using the Image Shift button on the Copy tab screen.
1. From the Copy tab screen, select the Image Shift button.
2. Select the applicable image shift features from the Image Shift screen.
3. When Margin Shift is selected, set the image shift parameters, using the left/right (or) up/
down buttons.
4. Select Original Orientation... and set and save the orientation.
5. You can elect to mirror the Side 1 settings to side 2 by selecting the Mirror Side 1 check
box.
6. Select Save to save the changes.
To Next Page
Loading...
Need help?
General
