Maintenance
Xerox 4112/4127 Copier/Printer 11-11
User Guide
Replacing the Booklet-Maker Staple Cartridge
The Control Panel displays a message indicating that the Booklet-Maker staple cartridge needs
to be replaced. Use the following procedure to replace the cartridge on this optional finisher.
1. Make sure that the machine has stopped copying and printing, then open the Right Cover
on the finisher.
2. Press the lever to the right and then pull out the Booklet-Maker staple cartridge.
3. Hold the tabs of the Booklet-Maker staple cartridge and then lift to remove it.
4. While holding the tabs of a new Booklet-Maker staple cartridge, return the cartridge to the
original position and gently push it until it clicks.
To Next Page
Loading...
Need help?
General
