Xerox 4112 User Manual

Problem Solving
Xerox 4112/4127 Copier/Printer 12-3
User Guide
Machine Troubleshooting
Check the machine status for machine troubleshooting.
Trouble during
copying.
Yes Action Refer to Copy Troubleshooting on page 12-12.
If NO, go to next symptom.
Trouble during
printing.
Yes Action Refer to Print Troubleshooting on page 12-16.
If NO, go to next symptom.
Trouble during
scanning
Yes Action Refer to Scan Troubleshooting on page 12-20.
WARNING
Precision components and high-voltage power supplies are used on the machine. Never open or
remove machine covers that are screwed shut unless specifically instructed in the User Guide. A
high-voltage component can cause electric shocks. When opening the panels and covers that are
screwed shut to install or detach optional accessories, be sure to follow instructions in the User
Guide. Do not try to alter the machine configuration or modify any parts. Doing so might cause
machine malfunction or fire.
Symptoms Check Remedy
Power is not
switched ON.
Is the power switch on the
machine turned off?
Turn the power switch o n.
Refer to Power on/off on page 1-14.
Is the power cord plugged into
the power outlet?
Turn the power switch off and then firmly plug in
the power cord. Then turn the power switch on.
Refer to Power on/off on page 1-14.
Is the power cord
disconnected from the
machine or the rear of the
rack?
Is power of the correct voltage
being supplied?
Make sure that the power supply is
200 -240 V (volts), 15 A (amperes).
Make sure that power of capacity compatible with
the specified maximum power consumption of the
machine
(2.8 - 3.1 KVA) is being supplied.
Symptoms Causes and Actions

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English