Xerox 4112/4127 Copier/Printer 8-1
User Guide
8
Paper and other
Media
Tip
The User Interface (UI) screens shown in this guide may or may not reflect the screens
displayed on your system. The UI screens vary from system to system and from marketplace to
marketplace. Therefore, the UI screens in this guide are a representation of the type of screens
that may be seen on your particular system.
Note
Use Xerox recommended paper to avoid: paper jams, reduced print quality, malfunctions and
other printer problems.
Loading Paper into Trays
Guidelines for Loading Paper into Trays
Do:
• Align the stack of paper before setting it in the tray.
• Fan transparencies and label paper before loading it into trays
• Fan transparencies output every 20 sheets to prevent them from
sticking together.
• After loading paper, affix the paper size label to the front of the tray
to indicate the paper size currently in the tray.
• Configure the paper tray attributes to match the attributes of the
paper loaded in the tray.
Don’t:
• Use paper that is folded, creased, waved, curled, or heavily warped.
• Load mixed paper sizes together into the tray.
To Next Page
Loading...
Need help?
General
