Product overview
Xerox 4112/4127 Copier/Printer 1-3
User Guide
Note
Throughout this guide, Standard Finisher or Booklet Maker Finisher may be referred to simply as
the Finisher.
No. Component Function
27 Post-process inserter
(Cover/Transparency separator
tray)/Tray 8
Load paper for cover or transparency separators. Paper
loaded here is not used for copying. (This tray is also known
as the Interposer)
28 Decurl button When you press this button, it activates a decurling feature
for the output material. This applies to lighter weight paper
especially
29 Output tray Copies are delivered here when specific output features are
selected, such as Automatic sorting, Collated, Uncollated, or
Normal.
30 Finisher tray Receives copies when you select stapled, punched, and Z-
folded copies.
31 Booklet output tray Receives copies when you select Bi-Fold or Bi-Fold + Stapling.
32 Booklet output tray button When you press this button, the booklet output tray is raised
so you can retrieve booklets from the output area.
33 Right cover Open to clear paper jams, replace staples, clear jammed
staples, or remove the scraps from the puncher.
34 Staple cartridges for booklet There are two staple cartridge for booklet. Remove this
cartridge to replace staples and clear staple jams.
Finisher
To Next Page
Loading...
Need help?
General
