Xerox 4112 User Manual

Addendum
14-28 Xerox 4112/4127 Copier/Printer
User Guide
049 222
049 223
049 224
049 225
049 228
049 229
049 232
049 233
049 234
049 235
049 236
049 237
049 238
049 239
049 240
049 241
049 242
049 243
049 244
049 245
049 246
049 247
049 248
049 249
049 250
049 251
049 252
049 253
Sensor problem/failure Power off, then power on
049 280
049 281
049 282
049 283
049 284
Sensor problem/failure Power off, then power on
049 285
049 286
EEPROM error Power off, then power on
049 287 System error Power off, then power on
049 288 A board in the machine or
HCS may be
disconnected.
Power off, then power on
049 300 Upper cover is open Close the upper cover
049 310 HCS download mode
failure
Power off, then power on
049 700 Error in stacking the
output paper/media
Remove the paper from the stacker tray
049 940 Front door is open Close the front door
049 941 UI indicates the Stacker
Cart and/or Tray needs to
be reset
Press the Unload button. The Wait light blinks until the
Stacker Tray has reached the down position.
When the Stacker Tray has reached the down position,
open the front door.
Position the Stacker Cart securely into the HCS.
Close the front door.
Fault code Possible cause Recommended solution

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English