Name: Yamaha 01V96
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

132 Chapter 11—Monitoring

01V96 Version 2—Owner’s Manual

Monitor and Solo Setup

For monitoring and solo setup, press the DISPLAY ACCESS [DIO/SETUP] button repeat-

edly until the DIO/Setup | Monitor page appears.

This page contains the following parameters:

A SOLO

This parameter turns the Solo function on or off. By default, it is set to Enabled.

B MODE

This parameter determines how the Solo function works. There are two options. The

setting affects only Input Channels.

• RECORDING............... In Recording Solo mode, soloed Input Channel signals are fed

to the Solo bus and output via the Monitor outputs. Other

buses (Stereo bus and Bus 1–8) are unaffected by this mode.

• MIXDOWN..................In Mixdown Solo mode, soloed Input Channel signals are fed

to the Stereo bus and output via the Monitor outputs. Unso-

loed Input Channels are not fed to the Stereo bus while the Solo

function is enabled.

C SEL MODE

This parameter determines how the Input Channels will be soloed when you press the

[SOLO] button of each Channel. There are two options.

• MIX SOLO.................... In Mix Solo mode, any number of channels can be soloed

simultaneously.

• LAST SOLO .................. In Last Solo mode, only one channel can be soloed at a time by

pressing the [SOLO] button. The Solo function that was previ-

ously enabled for channels is automatically cancelled.

D LISTEN

This parameter determines the source of the Input Channel Solo signal: Pre Fader or

Post Pan. When Pre Fader is selected, turning on the PAN button below the Pre Fader

option will solo the channel with the pan position speciﬁed by the Pan setting even if the

source precedes the fader. This parameter is effective only in Recording Solo mode.

Tip:

•Recording Solo mode is convenient when you wish to monitor certain Input Channels while

recording, since the Stereo bus and Bus 1–8 signals are unaffected.

•Mixdown Solo mode is useful when you wish to mute unsoloed Input Channels and feed

soloed Input Channel signals to the Stereo bus during mixdown.

3 42

Other manuals for Yamaha 01V96

Questions and Answers:

Need help?

Do you have a question about the Yamaha 01V96 and is the answer not in the manual?

General