Yamaha 01V96 User Manual

Other Functions 229
01V96 Version 2—Owner’s Manual
Other Functions
19
19 Other Functions
This chapter describes the 01V96’s miscellaneous functions.
Changing the Input and Output Channel Names
You can change the default name of the input channels (Input Channels 1–32, ST IN Chan-
nels 1–4) and output channels (Aux Outs 1–8, Bus Outs 1–8, Stereo Out), if you desire.
Changing the Input Channel Names
1 Press the DISPLAY ACCESS [PATCH] button repeatedly until the Patch| In
Name page appears.
Channel IDs, Short names, and Long names are listed from left to right on the page. You
can specify Short names in the parameter boxes (
1) in the center column, and Long names
in the parameter boxes (
2) in the right column.
2 Move the cursor to the desired parameter box, then use the Parameter wheel
or the [INC]/[DEC] buttons to select a port for which you want to change
the name.
3 Press [ENTER].
The Title Edit window appears, which enables you to edit the name.
4 Edit the name, move the cursor to the OK button, then press [ENTER].
The new name is now effective.
Tip: The edited name is stored in the Input Patch library.
3
12

Yamaha 01V96 Specifications

General

Channels	40
Mic Preamps	16
Bit Depth	24-bit
MIDI	Yes
EQ Bands	4-band Parametric
Aux Sends	8
A/D-D/A Conversion	24-bit
Effects Processors	4
Power Supply	Internal
Type	Digital
Sample Rate	44.1 kHz, 48 kHz
Effects	Yes
USB	No
Weight	33 lbs
Inputs - Other	8 digital
Outputs - Digital	AES/EBU, S/PDIF
Computer Connectivity	No
Sampling Rate	44.1 kHz, 48 kHz
Internal Processing	32-bit
Dynamic Processing	Gate, Compressor, Limiter
Digital I/O	AES/EBU, S/PDIF
Analog I/O	XLR, TRS
Outputs - Main	2