Name: Yamaha 01V96
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

60 Chapter 5—Tutorial

01V96 Version 2—Owner’s Manual

Overdubbing to Other Tracks

This section describes how to overdub the musical instruments or microphone connected

to the INPUT connectors 1 and 2 to the digital MTR’s Tracks 9 and 10, while listening to the

performance recorded on Tracks 1–8.

Setting the Input Levels

1 Connect the musical instruments to INPUT

connectors 1 and 2, and adjust the corre-

sponding [PAD] switches and [GAIN] con-

trols so that the [PEAK] indicators

temporarily ﬂash at the highest volumes.

2 Press the LAYER [1–16] button.

Input Channel Layer 1–16 is now available for control from the channel strip section.

3 Press the DISPLAY ACCESS [HOME] button, then press the [F1] button to dis-

play the Meter | CH1-32 page.

4 Make sure that [ON] button indicators for the channels to which the instru-

ments or microphone are connected are lit, then raise the corresponding

faders to 0dB.

Turn off the [ON] buttons for the channels not in use.

5 While the musicians play the musical instruments, check the input channel

levels using the level meters on the display.

20dB

GAIN

-16

-60

PAD

PEAK

[PAD] switch

[GAIN] control

[PEAK] indicator

Other manuals for Yamaha 01V96

Questions and Answers:

Need help?

Do you have a question about the Yamaha 01V96 and is the answer not in the manual?

General