Name: Yamaha 01V96
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Remote Control 189

01V96 Version 2—Owner’s Manual

Remote Control

17 Remote Control

This chapter describes the Remote function, which enables you to control external equip-

ment directly from the 01V96 top panel.

About Remote Function

The 01V96’s Remote function enables you to control external DAW (Digital Audio Work-

station) equipment, MIDI devices, recorders, etc.

There are two types of Remote functions (Remote and Machine Control):

■ REMOTE (Remote Layer)

To use these types of Remote functions, you must connect the 01V96 to a target device via

USB or an optional MY8-mLAN card installed in the slot, and operate the faders and [ON]

buttons on the top panel to control the external device remotely.

You can specify a target device and parameter values on the DIO/Setup | Remote page. This

layer is enabled when you turn on the LAYER [REMOTE] button. During Remote opera-

tion, the controls on the top panel enable you to control the external device. (You cannot

adjust the 01V96’s parameters unless you select a different layer.)

You can assign functions of a target device to the controls on the top panel of the 01V96 by

using Remote layer. The following targets are available for remote control:

• ProTools ........................You can remotely control Digidesign Pro Tools.

• Nuendo ..........................You can remotely control Steinberg Nuendo.

• Cubase SX .....................You can remotely control Steinberg Cubase SX.

• General DAW................You can remotely control DAW software that supports the pro-

tocol used by Pro Tools.

• User Deﬁned.................You can also assign MIDI messages to the faders or [ON] but-

tons to remotely control a connected MIDI device, such as a

synthesizer.

• User Assignable Layer.......You can combine the 01V96 channels to create a custom

layer. (See page 233 for more information on this function.)

■ Machine Control

By using MIDI Machine Control commands and the DIO/Setup | Machine page, you can

control an external recording machine that is connected to the 01V96 MIDI port, USB port,

or optional MY8-mLAN card installed in the slot.

Tip: To control external devices from the 01V96, you can also use the User Deﬁned buttons.

Refer to “19 Other Functions” for more information.

Other manuals for Yamaha 01V96

Questions and Answers:

Need help?

Do you have a question about the Yamaha 01V96 and is the answer not in the manual?

General