178 Chapter 16—Libraries
01V96 Version 2—Owner’s Manual
The alarm indicators also appear when the Surround mode, Aux pair, and other non-chan-
nel parameter settings originally stored in the memory do not match those for the destina-
tion channel. However, if the channel type of the memory and that of the destination
channel match, you can recall the settings even with the alarm indicators displayed. (For
unmatched parameter settings, the 01V96 will use the settings in the memory that is to be
recalled.)
The following preset memories are available for the Channel library.
Input Patch Library
The Input Patch library enables you to store and recall all Input Patch settings. The library
contains one preset memory and 32 user (readable & writable) memories.
To access the Input Patch library, press the DISPLAY ACCESS [PATCH] button repeatedly
until the Patch | IN LIB page appears. For details on storing and recalling memories, see
“General Library Operation” on page 175.
Input Patch preset memory #0 contains the following settings:
No. Preset Name Description
0
Reset (–∞ dB)
This preset memory resets all parameters of the currently-selected channel
to their initial values and sets the channel fader level to (–∞ dB).
1
Reset (0 dB)
This preset memory resets all parameters of the currently-selected channel
to their initial values and sets the channel fader level to 0 dB (i.e., nominal).
Input Channels 1–16
INPUT connectors 1–16
Input Channels 17–24
ADAT IN Channels 1–8
Input Channels 25–32
Slot Channels 1–8
ST IN Channels 1–4
Internal Effects Processor 1–4 Outputs 1 & 2
To Next Page
Loading...
Need help?
General
