Name: Yamaha 01V96
Brand: Yamaha
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Controlling Parameters by Using Parameter Changes 225

01V96 Version 2—Owner’s Manual

MIDI

Controlling Parameters by Using Parameter Changes

You can control 01V96 parameters in real time by using Parameter Change messages that

are System Exclusive messages, instead of using MIDI Control Changes.

See “MIDI Data Format” at the end of this Manual for detailed information on available

Parameter Changes.

1 Press the DISPLAY ACCESS [DIO/SETUP] button repeatedly until the

DIO/Setup | MIDI/Host page appears, then specify ports for transmission

and reception of MIDI messages (see page 216).

2 Make connections using the ports selected in Step 1 so that the 01V96 can

transmit and receive MIDI messages to and from the external device.

3 Press the DISPLAY ACCESS [MIDI] button, then press the [F1] button to dis-

play the MIDI | Setup page, then turn off the Tx and Rx ON/OFF buttons in

the PARAMETER CHANGE row.

The 01V96 will now set certain parameter values when it receives corresponding Parameter

Changes. Also, when you adjust certain parameters on the 01V96, it transmits correspond-

ing Parameter Changes.

Note: Before controlling parameters using Parameter Changes, make sure that both Tx and

Rx ON/OFF buttons in the CONTROL CHANGE row are turned off.

Other manuals for Yamaha 01V96

Questions and Answers:

Need help?

Do you have a question about the Yamaha 01V96 and is the answer not in the manual?

General