232 Chapter 19—Other Functions
01V96 Version 2—Owner’s Manual
• Initial Data Nominal
If this check box is on, Input Channel faders and ST IN Channel level controls are set to
nominal (0 dB) when you recall Scene #0. (If this check box is off, they are set to –∞.)
• Scene MEM Auto Update
If this check box is on, you can use the Scene Memory Auto Update function (see page 169).
• Cascade COMM Link
If this check box is on, various functions and parameters are linked between cascaded
01V96s (See page 238 for more information on cascade connection). When the check box
is off, only the Solo function is linked.
• Auto Direct Out On
If this check box is on and you change the channel Direct Out destination from “–” to any
other output, the channel Direct Out is automatically enabled. If you change the channel
Direct Out destination from an output to “–,” the channel Direct Out is automatically dis-
abled.
• Routing ST Pair Link
When this check box is checked, paired channels’ routing to the Stereo Bus will be linked.
Prefer2 page
The Prefer2 page enables you to name the channel indicated on the display, and adjust the
display brightness.
This page contains the following parameters:
A Channel ID/Channel
This parameter selects a style for the displayed channel. If the Channel ID check box is
selected, the Channel ID appears (e.g., CH1, CH16, AUX1). If the Channel Short Name
check box is on, the Channel Short name appears (see page 229).
B Channel Copy Parameter
This parameter selects the channel parameters to be copied when you assign the Chan-
nel Copy function to one of the User Defined buttons (see page 235). You can select
multiple options.
• ALL ................................ This button selects all parameters that can be copied. When you
turn on this button, all other options are cancelled.
• FADER........................... Copies the fader values.
• ON.................................. Copies the on/off status of the [ON] buttons.
• PA N ................................ Copies the pan settings.
1
2
3
To Next Page
Loading...
Need help?
General
