Zte ZXR10 2920 User Manual

Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 95
Result: This deletes a static multicast group.
13. To bind static multicast group based on port or
aggregation to ports on Vlan, use command set igmp
snooping vlan <1-4094> add group <A. B. C. D>
[port <portlist> |trunk <trunklist>] in global configuration
mode. This is shown in
Table 105.
TABLE 107 STATIC MULTICAST GROUP TO PORTS COMMAND
Format Mode Function
set igmp
snooping vlan
<1-4094> add
group <A. B.
C. D>[ port
<portlist>|
trunk
<trunklist>]
Global
config
This binds static multicast group to
ports on Vlan
Result: This binds static multicast group to ports on Vlan.
14. To unbind static multicast group from ports, use
command set igmp snooping vlan <1-4094> delete
group <A. B. C. D>[port <portlist>| trunk <trunklist>]
in global configuration mode. This is shown in
Table 108.
TABLE 108 SET IGMP SNOOPING VLAN DELETE GROUP PORT COMMAND
Format Mode
Function
set igmp snooping vlan
<1-4094> delete group
<A. B. C. D>[ port
<portlist>|trunk<trunklist>
Global
config
This unbinds static
multicast group from
ports
Result: This unbinds static multicast group from ports.
15. To add static multicast router port to a Vlan, use
command set igmp snooping vlan <1-4094> add smr
[port <portlist> | trunk <trunklist>] in global configuration
mode. This is shown in
Table 109.
TABLE 109 SET IGMP SNOOPING VLAN ADD SMR PORT COMMAND
Format Mode Function
set igmp
snooping vlan
<1-4094> add
smr [port
<portlist> |
trunk
<trunklist>]
Global
config
This adds static multicast router
port to a Vlan
Result: This adds static multicast router port to a Vlan.
16. To unbind static multicast group from ports, use
command set igmp snooping vlan <1-4094> delete

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English