Zte ZXR10 2920 User Manual

Chapter 8 Access Service
Confidential and Proprietary Information of ZTE CORPORATION 183
7. To clear redirect policy, use command clear policy
redirect in sqinq-session <1-256> in global configuration
mode. This is shown in
Table 299.
TABLE 299 CLEAR POLICY REDIRECT COMMAND
Format Mode Function
clear policy
redirect in sqinq-
session <1-256>
global config This clears redirect
policy
Result: This clears redirect policy.
8. To set policy of statistics, use command set policy
statistics in sqinq-session <1-256> counter <0-31> in
global configuration mode. This is shown in
Table 300.
TABLE 300 SET POLICY STATISTICS COMMAND
Format Mode Function
set policy
statistics in
sqinq-session <1-
256> counter <0-
31>
global config This sets policy of
statistics
Result: This sets policy of statistics.
9. To clear policy of statistics, use command clear policy
statistics in sqinq-session <1-256> in global configuration
mode. This is shown in
Table 301.
TABLE 301 CLEAR POLICY STATISTICS COMMAND
Format Mode Function
clear policy
statistics in
sqinq-session <1-
256>
global config This clears policy of
statistics
Result: This clears policy of statistics.
10. To apply SQinQ session to port, use command set port
<portlist> sqinq-session <sessionlist> {enable|disable}
in global configuration mode. This is shown in
Table 302.
TABLE 302 SET PORT SQINQ SESSION COMMAND
Format Mode Function
set port <portlist>
sqinq-session
<sessionlist>
{enable|disable}
global config This applies SQinQ
session to port
Result: This applies SQinQ session to port.

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English