Chapter 9 Network Management
Confidential and Proprietary Information of ZTE CORPORATION 273
Note: When configure port or trunk in the VLAN, user can
insert port or trunk number in the text column following it,
in the format such like “1, 3-5”; user can also select
corresponding check boxes of the items wanted in the VLAN.
7. Batch VLANs configuration page is shown in
Figure 55.
FIGURE 55 BATCH VLAN
8. Select and configure some attributes of the Vlan in the page,
then click Apply button to submit.
Result: Batch Vlan is configured.
E
ND OF STEPS
VLAN has been configured.
Configuring PVLAN
This topic describes the configuration of PVLAN.
For the configuration PVLAN, perform the following steps.
1. Click the catalog tree in the left of the system main page
Configuration > PVLAN > PVLAN Overview to open
PVLAN information page, as shown in
Figure 56.
Result
Purpose
Steps
To Next Page
Loading...
Need help?
General