Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
212 Confidential and Proprietary Information of ZTE CORPORATION
3. To set secondary port in ZESR domain, use command
set zesr domain <domainId> secondary port
<portname> in global configuration mode. This is shown in
Table 354.
TABLE 354 SET ZESR DOMAIN SECONDARY PORT COMMAND
Format Mode Function
set zesr domain
<domainId>
secondary port
<portname>
global config This sets secondary
port in ZESR
domain
Result: This sets secondary port in ZESR domain.
4. To set primary trunk port in ZESR domain, use command
set zesr domain <domainId> primary trunk
<trunkname> in global configuration mode. This is shown
in
Table 355.
TABLE 355 SET ZESR DOMAIN PRIMARY TRUNK COMMAND
Format Mode Function
set zesr domain
<domainId>
primary trunk
<trunkname>
global config This sets primary
trunk port in ZESR
domain
Result: This sets primary trunk port in ZESR domain.
Note: Set trunk port as primary port on switches in ZESR
domain
5. To set secondary trunk port in ZESR domain, use
command set zesr domain <domainId> secondary trunk
<trunkname> in global configuration mode. This is shown
in
Table 356.
TABLE 356 SET ZESR DOMAIN SECONDARY TRUNK COMMAND
Format Mode Function
set zesr domain
<domainId>
secondary trunk
<trunkname>
global config This sets secondary
trunk port in ZESR
domain
Result: This sets secondary trunk port in ZESR domain.
Note: Set trunk port as the secondary port on switches in
ZESR domain.
6. To add control VLAN in ZESR domain, use command set
zesr domain <domainId> add control_vlan <vlanname>
in global configuration mode. This is shown in
Table 357.

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English