Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
138 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 213 SET QOS POLICER PARAMETERS COMMAND
Format Mode Function
set bandwidth
geport <portlist>
ingress {{on rate
<2000-1000000> }
| off }
global config
This configures the
geport ingress
session
Result: This configures the geport ingress session of flux
monitor.
14. To configure the geport ingress session of the flux
monitor, use command set bandwidth geport <portlist>
ingress {{on rate <2000-1000000> } | off }in global
configuration mode. This is shown in
Table 203.
TABLE 214 SET QOS POLICER PARAMETERS COMMAND
Format Mode Function
set bandwidth
geport <portlist>
ingress {{on rate
<2000-1000000> }
| off }
global config
This configures the
geport ingress
session
Result: This configures the geport ingress session of flux
monitor.
15. To configure the geport egress session of the flux monitor,
use command set bandwidth geport <portlist> egress
{on rate <281-1000000> [burstsize <4-16380>]} |
off }in global configuration mode. This is shown in
Table
203.
TABLE 215 SET QOS POLICER PARAMETERS COMMAND
Format Mode Function
set bandwidth
geport <portlist>
egress {on rate
<281-1000000>
[burstsize <4-
16380>]} | off }
global config
This configures the
geport egress
session
Result: This configures the geport egress session of flux
monitor.
16. To configure the packet-type of geport ingress session of
the flux monitor, use command set bandwidth geport
<portlist> packet-type { unicast | nounicast | multicast
| broadcast } {enable | disable }in global configuration
mode. This is shown in
Table 203.

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English