Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
200 Confidential and Proprietary Information of ZTE CORPORATION
<portlist> in global configuration mode. This is shown in
Table 334.
TABLE 334 SET DHCP OPTION82 COMMAND
Format Mode Function
set dhcp option82
{add|delete} port
<portlist>
global config This enable/disable
Option82 function
based on port
Result: This enable/disable Option82 function based on port.
Note: Option82 function is disabled by default. Command
is to enable/disable Option82 function on port. When global
DHCP function is enable then this function is enabled.
3. To enable/disable DHCP Option82 Circuit_ID sub-option
based on port, use command set dhcp option82 sub-
option port <portname> circuit-ID {on |{cisco|china-
tel|dsl-forum}|off} in global configuration mode. This is
shown in
Table 335.
TABLE 335 SET DHCP OPTION82 SUB-OPTION COMMAND
Format Mode Function
set dhcp option82
sub-option port
<portname>
circuit-ID {on
|{cisco|china-
tel|dsl-
forum}|off}
global config This enable/disable
DHCP Option82
Circuit_ID sub-
option based on
port
Result: This enable/disable DHCP Option82 Circuit_ID sub-
option based on port.
Important! ZXR10 2920/2928/2952 supports three forms of
Circuit_ID sub-option: Cisco form, CHINA-TEL form and
DSL-Forum form.
4. To enable/disable DHCP Option82 Subscriber_ID sub-
option based on port, use command set dhcp option82
sub-option port <portname> Subscriber-ID {on
<string>|off} in global configuration mode. This is shown
in
Table 336.
TABLE 336 SET DHCP OPTION82 COMMAND
Format Mode Function
set dhcp option82
sub-option port
<portname>
Subscriber-ID
{on <string>|off}
global config This enable/disable
DHCP Option82
Subscriber_ID sub-
option based on
port
Result: This enable/disable DHCP Option82 Subscriber_ID
sub-option based on port.

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English