Zte ZXR10 2920 User Manual

Chapter 8 Access Service
Confidential and Proprietary Information of ZTE CORPORATION 179
TABLE 289 SET QINQ CUSTOMER PORT COMMAND
Format Mode Function
set qinq customer
port <portlist>
{enable|disable}
global config This add/delete a
customer port
Result: This add/delete a customer port.
2. To add/delete an uplink port, use command set qinq
uplink port <portlist> {enable|disable} in global
configuration mode. This is shown in
Table 290.
TABLE 290 SET QINQ UPLINK PORT COMMAND
Format Mode Function
set qinq uplink
port <portlist>
{enable|disable}
global config This add/delete a
uplink port
Result: This add/delete a uplink port.
3. To set tpid of the outer tag, use command set qinq tpid
<tpid> in global configuration mode. This is shown in
Table
291.
TABLE 291 SET QINQ TPID COMMAND
Format Mode Function
set qinq tpid
<tpid>
global config This set tpid of the
outer tag
Result: This set tpid of the outer tag.
4. To display QinQ configuration, use command show qinq in
global configuration mode. This is shown in
Table 292.
TABLE 292 SHOW QINQ COMMAND
Format Mode Function
show qinq global config This displays QinQ
configuration
Result: This displays QinQ configuration.
E
ND OF STEPS
PVLAN has been configured on ZXR10 2920/2928/2952.
When QinQ is configured, customer port and uplink port of
SPVLAN can be set as an untagged port, or as a tagged port.
This example describes that suppost customer port of switch A is
port 1 and uplink port is port 24. Customer port of switch B is
port 1 and uplink port is port 24. This is shown in
Figure 33.
Result
Note
Example

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English