Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
118 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 169 SET STP INSTANCE VLAN COMMAND
Format Mode Function
set stp instance
<0-
15>[add|delete]
vlan <vlanlist>
Global config This sets the
mapping relation
between the VLAN
and instance
Result: This sets the mapping relation between the VLAN
and instance.
9. To set MST area name, use command set stp name
<name> in global configuration mode. This is shown in
Table 170.
TABLE 170 SET STP NAME COMMAND
Format Mode Function
set stp name
<name>
Global
config
This sets MST area name
Result: This sets MST area name.
25. To enable/disable STP port, use command set stp port
<portlist> {enable|disable} in global configuration mode.
This is shown in
Table 171.
TABLE 171 SET STP PORT COMMAND
Format Mode Function
set stp port
<portlist>
{enable|disable}
Global
config
This enable/disable stp
port
Result: This enable/disable STP port.
26. To set port’s link type of the instance, use command set
stp port <portlist> linktype {point-point|shared} in
global configuration mode. This is shown in
Table 172.
TABLE 172 SET STP PORT LINKTYPE COMMAND
Format Mode Function
set stp port
<portlist> linktype
{point-
point|shared}
Global
config
This sets port’s link type of
the instance
Result: This sets port’s link type of the instance.
27. To set port packet type of the instance, use command
set stp port <portlist> packettype
{IEEE|CISCO|HUAWEI| HAMMER|extend}} in global
configuration mode. This is shown in
Table 173.

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English