Zte ZXR10 2920 User Manual

ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual （Volume I）
76 Confidential and Proprietary Information of ZTE CORPORATION
This topic describes the procedure of port mirroring configuration
of ZXR10 2920/2928/2952.
To mirror the ports, perform the following steps.
1. To add a mirroring port, use command set mirror add
source-port <portlist> {ingress|egress} in global
configuration mode. This is shown in
Table 59.
TABLE 59 SET MIRROR COMMAND
Format Mode Function
set mirror add
source-port
<portlist>
{ingress|egress}
Global
config
This adds a mirroring port
Result: This adds a mirroring port.
2. To delete mirroring port, use command set mirror delete
source-port <portlist> {ingress|egress} in global
configuration mode. This is shown in
Table 60.
TABLE 60 DELETE MIRRORING PORT COMMAND
Format Mode Function
set mirror delete
source-port
<portlist>
{ingress|egress}
Global
config
This deletes mirroring port
Result: This deletes mirroring port.
3. To set a monitoring port, use command set mirror add
dest-port <portname> {ingress|egress} in global
configuration mode. This is shown in
Table 61.
TABLE 61 SET MIRROR DEST-PORT COMMAND
Format Mode Function
set mirror add
dest-port
<portname>
{ingress|egress}
Global
config
This sets a monitoring port
Result: This sets a monitoring port.
4. To delete destination monitoring port, use command set
mirror delete dest-port <portname> {ingress|egress}
in global configuration mode. This is shown in
Table 62.
TABLE 62 SET MIRROR DELETE DEST-PORT COMMAND
Format Mode Function
set mirror delete
dest-port
<portname>
Global
config
This deletes destination
monitoring port
Steps

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English