Zte ZXR10 2920 User Manual

Chapter 9 Network Management
Confidential and Proprietary Information of ZTE CORPORATION 235
{valid|underCreation| createRequest|invalid}} in SNMP
config mode. This is shown in
Table 387.
TABLE 387 SET HISTORY COMMAND
Format Mode Function
set history <1-65535>
{datasource<portname>|bu
cketRequested <1-
65535>|owner
<string>|interval <1-3600>|
status
{valid|underCreation|
createRequest|invalid}}
SNMP
config
These
create/configure
instances of
history group
Result: These create/configure instances of history group.
The command line configuration of the history group is to
configure the historyControlTable in the history group. The
configuration involves:
f historyControlDataSource: It is the ifIndex oid in rfc1213
interface group, for example, the oid of port 16 is 1. 3.
6. 1. 2. 1. 2. 2. 1. 1. 16. In command line
configuration, enter the port number 16 directly.
f historyControlBucketsRequested: By default, it is 50.
f historyControlOwner.
f historyControlInterval. By default, it is 1, 800 seconds.
f historyControlStatus: It can be “valid”, “underCreation”,
“createRequest” and “invalid”. When it is set to
“invalid”, the instance is deleted. The control status
can be set to “valid” only when the data source is
specified.
3. To create/configure instances of the statistics group, use
command set statistics <1-65535> {datasource
<portname>|owner <string>|status
{valid|underCreation|createRequest| invalid}} in SNMP
config mode. This is shown in
Table 388.
TABLE 388 SET STATISTICS COMMAND
Format Mode Function
set statistics <1-65535> {datasource
<portname>|owner <string>|status
{valid|underCreation|createRequest|
invalid}}
SNMP
config
This
create/configure
instances of the
statistics group
Result: This create/configures instances of the statistics
group
Command line configuration of statistics group is to configure
etherStatsTable in statistics group. Configuration involves:

Zte ZXR10 2920 Specifications

General

Brand	Zte
Model	ZXR10 2920
Category	Switch
Language	English