Chapter 7 Wireless
LTE Series User’s Guide
105
The following table describes the labels in this screen.
7.4 More AP Edit
Use this screen to create a guest wireless network and configure its security settings. Click the Modify
icon in the More AP screen. The following screen displays. Click Network Setting > Wireless > More AP
Edit.
Table 31 Guest/More APNetwork Setting > Wireless >
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Status This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
SSID An SSID profile is the set of parameters relating to one of the Zyxel Device’s BSSs. The
SSID (Service Set IDentifier) identifies the Service Set with which a wireless device is
associated. You can configure up to four SSIDs to enable multiple BSSs (Basic Service
Sets) on the Zyxel Device.
This field displays the name of the wireless profile on the network. When a wireless
client scans for an AP to associate with, this is the name that is broadcast and seen
in the wireless client utility.
Security This field indicates the security mode of the SSID profile.
Guest WLAN This field shows whether the SSID profile is an external or home guest.
Modify Click Modify to change the SSID profile.