Chapter 7 Wireless
LTE Series User’s Guide
108
7.5 MAC Authentication
Use this screen to give exclusive access to specific devices (Allow) or exclude specific devices from
accessing the Zyxel Device (Deny), based on the MAC address of each device. Every Ethernet device
has a unique factory-assigned MAC (Media Access Control) address, which consists of six pairs of
hexadecimal characters, for example: 00:A0:C5:00:00:02. You need to know the MAC addresses of the
device you want to allow/deny to configure this screen.
Password Select Generate password automatically or enter a Password.
The password has two uses.
1. Manual. Manually enter the same password on the Zyxel Device and the client.
Enter 8-63 ASCII characters or exactly 64 hexadecimal (‘0-9’, ‘a-f’) characters.
2. WPS. When using WPS, the Zyxel Device sends this password to the client.
Note: Enter 8-63 ASCII characters only. 64 hexadecimal characters are not
accepted for WPS.
Click the Eye icon to show or hide the password for your wireless network. When the
Eye icon is slashed , you’ll see the password in plain text. Otherwise, it’s hidden.
more... Click this to show more fields in this section. Click this to hide them.
Encryption AES is the default data encryption type, which uses a 128-bit key.
Timer This is the rate at which the RADIUS server sends a new group key out to all clients.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
Table 32 Network Setting > Wireless > More AP Edit (continued)
LABEL DESCRIPTION