LTE Series User’s Guide
83
CHAPTER 6
Broadband
6.1 Overview
This chapter discusses the Zyxel Device’s Broadband screens. Use these screens to configure your Zyxel
Device for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks, such as a LAN (Local Area Network) and other networks, so that a
computer in one location can communicate with computers in other locations.
Figure 57 LAN and WAN
6.1.1 What You Can Do in this Chapter
• Use the Broadband screen to view a WAN interface. You can also configure the WAN settings on the
Zyxel Device for Internet access (Section 6.2 on page 84).
• Use the WAN Backup screen to configure your Zyxel Device’s WAN backup settings (Section 6.3 on
page 89).
• Use the Ethernet WAN screen to convert LAN port number four as a WAN port or restore the Ethernet
WAN port to a LAN port (Section 6.4 on page 90).
• Use the Cellular WAN screen to configure an LTE WAN connection (Section 6.5 on page 91).
• Use the Cellular SIM screen to enter the PIN of your SIM card (Section 6.6 on page 92).
• Use the Cellular Band screen to view or edit an LTE WAN interface. You can also configure the WAN
settings on the Zyxel Device for Internet access (Section 6.2 on page 84).
• Use the Cellular PLMN screen to display available Public Land Mobile Networks (Section 6.8 on page
94).