ZyXEL Communications LTE5388-M804 User Manual

Chapter 14 MAC Filter
LTE Series User’s Guide
196
The following table describes the labels in this screen.
14.2.1 Add New Rule
You can choose to enable or disable the filters per entry; make sure that the check box under Active is
selected if you want to use a filter, as shown in the example below. Select Security > MAC Filter > Add
New Rule. The screen appears as shown.
Figure 146 Security > MAC Filter > Add New Rule
The following table describes the labels in this screen.
Table 72 Security > MAC Filter
LABEL DESCRIPTION
MAC Address Filter Select Enable to activate the MAC filter function.
MAC Restrict Mode Select Allow to only permit the listed MAC addresses access to the Zyxel Device. Select
Deny to permit anyone access to the Zyxel Device except the listed MAC addresses.
Add New Rule Click this button to create a new entry.
Set This is the index number of the MAC address.
Active Select Active to enable the MAC filter rule. The rule will not be applied if Allow is not
selected under MAC Restrict Mode.
Host Name Enter the host name of the wireless or LAN clients that are allowed access to the Zyxel
Device.
MAC Address Enter the MAC addresses of the wireless or LAN clients that are allowed access to the Zyxel
Device in these address fields. Enter the MAC addresses in a valid MAC address format, that
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Delete Click the Delete icon to delete an existing rule.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
Table 73 Security > MAC Filter > Add New Rule
LABEL DESCRIPTION
Set This is the index number of the MAC address.
Active Select Active to enable the MAC filter rule. The rule will not be applied if Allow is not
selected under MAC Restrict Mode.
Host Name Enter the host name of the wireless or LAN clients that are allowed access to the
Zyxel Device.
MAC Address Enter the MAC addresses of the wireless or LAN clients that are allowed access to
the Zyxel Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Delete Click the Delete icon to delete an existing rule.
Cancel Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.

ZyXEL Communications LTE5388-M804 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1733 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
4G standard	LTE-TDD & LTE-FDD
3G standards	HSPA+, HSUPA, WCDMA
UMTS bands supported	850, 900, 1800, 2100 MHz
USB 2.0 ports quantity	1
Ethernet LAN (RJ-45) ports	2
MAC address table	64 entries
Security algorithms	WPA, WPA2
Supported network protocols	IPv4/IPv6
Product type	Tabletop router
Product color	Grey, White
LED indicators	LTE, Power, USB, WLAN
Power source type	DC
Power consumption (typical)	24 W
Certification	CE, WEEE, RoHS, HSF
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	LAN (RJ-45), Phone (RJ-11)
Package type	Box
Package depth	170 mm
Package width	247 mm
Package height	120 mm
Package weight	1600 g
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	100 mm
Height	205 mm
Weight	599 g