Chapter 27 Remote Management
LTE Series User’s Guide
252
Figure 183 Maintenance > Remote Management > Trust Domain for IP Passthrough
The following table describes the fields in this screen.
27.7 Add Trust Domain
Use this screen to add a public IP address or a complete domain name of a device which is allowed to
access the Zyxel Device. Click the Add Trust Domain button in the Maintenance > Remote Management
> Trust Domain for IP Passthrough screen to open the following screen.
Figure 184 Maintenance > Remote Management > Trust Domain for IP Passthrough > Add Trust Domain
The following table describes the fields in this screen.
Table 108 Maintenance > Remote Management > Trust Domain for IP Passthrough
LABEL DESCRIPTION
Add Trust Domain Click this to add a trusted host IP address.
IP Address This field shows a trusted host IP address.
Delete Click the Delete icon to remove the trusted host IP address.
Table 109 Maintenance > Remote Management > Trust Domain for IP Passthrough > Add Trust Domain
LABEL DESCRIPTION
IP Address Enter a public IPv4/IPv6 IP address which is allowed to access the service on the Zyxel
Device from the WAN.
Cancel Click Cancel to restore your previously saved settings.
OK Click OK to save your changes back to the Zyxel Device.