LTE Series User’s Guide
223
CHAPTER 18
Log
18.1 Log Overview
These screens allow you to determine the categories of events and/or alerts that the Zyxel Device logs
and then display these logs or have the Zyxel Device send them to an administrator (through email) or
to a syslog server.
18.1.1 What You Can Do in this Chapter
• Use the System Log screen to see the system logs (Section 18.2 on page 224).
• Use the Security Log screen to see the security-related logs for the categories that you select (Section
18.3 on page 224).
18.1.2 What You Need To Know
The following terms and concepts may help as you read this chapter.
Alerts and Logs
An alert is a type of log that warrants more serious attention. They include system errors, attacks (access
control) and attempted access to blocked web sites. Some categories such as System Errors consist of
both logs and alerts. You may differentiate them by their color in the View Log screen. Alerts display in
red and logs display in black.
Syslog Overview
The syslog protocol allows devices to send event notification messages across an IP network to syslog
servers that collect the event messages. A syslog-enabled device can generate a syslog message and
send it to a syslog server.
Syslog is defined in RFC 3164. The RFC defines the packet format, content and system log related
information of syslog messages. Each syslog message has a facility and severity level. The syslog facility
identifies a file in the syslog server. Refer to the documentation of your syslog program for details. The
following table describes the syslog severity levels.
Table 91 Syslog Severity Levels
CODE SEVERITY
0 Emergency: The system is unusable.
1 Alert: Action must be taken immediately.
2 Critical: The system condition is critical.
3 Error: There is an error condition on the system.
4 Warning: There is a warning condition on the system.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
