Chapter 8 Home Networking
LTE Series User’s Guide
138
8.4 UPnP
Universal Plug and Play (UPnP) is an open networking standard that uses TCP/IP for simple peer-to-peer
network connectivity between networking devices or software applications which have UPnP enabled.
A UPnP device can dynamically join a network, obtain an IP address, advertise its services, and learn
about other devices on the network. A device can also leave a network automatically when it is no
longer in use.
See Section 8.6 on page 140 for more information on UPnP.
Use the following screen to configure the UPnP settings on your Zyxel Device. Click Network Setting >
Home Networking > UPnP to display the screen shown next.
Figure 93 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 43 Static DHCP: Configuration
LABEL DESCRIPTION
Table 44 Network Settings > Home Networking > UPnP
LABEL DESCRIPTION
UPnP State
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open
the Web Configurator's login screen without entering the Zyxel Device's IP address (although
you must still enter the password to access the Web Configurator).
UPnP NAT-T State