Chapter 20 ARP Table
LTE Series User’s Guide
230
20.2 ARP Table
Use the ARP table to view the IPv4-to-MAC address mappings for each device connected to the Zyxel
Device. The neighbor table shows the IPv6-to-MAC address mappings of each IPv6 neighbor. To open
this screen, click System Monitor > ARP Table.
Figure 170 System Monitor > ARP Table
The following table describes the labels in this screen.
Table 96 System Monitor > ARP Table
LABEL DESCRIPTION
# This is the ARP table entry number.
IPv4/IPv6
Address
This is the learned IPv4 or IPv6 IP address of a device connected to a port.
MAC Address This is the MAC address of the device with the listed IP address.
Device This is the type of interface used by the device. You can click the device type to go to its
configuration screen.