Chapter 13 Firewall
LTE Series User’s Guide
187
13.4 Protocol (Customized Services)
You can configure customized services and port numbers in the Protocol screen. Each set of protocol
rules listed in the table are reusable objects to be used in conjunction with ACL rules in the Access
Control screen. For a comprehensive list of port numbers and services, visit the IANA (Internet Assigned
Number Authority) website. Click Security > Firewall > Protocol to display the following screen.
Note: Removing a protocol rule will also remove associated ACL rules.
Figure 140 Security > Firewall > Protocol
The following table describes the labels in this screen.
13.4.1 Add Customized Service
Add a customized rule or edit an existing rule by specifying the protocol and the port numbers. Click
Add New Protocol Entry in the Protocol screen to display the following screen.
Table 67 Security > Firewall > Protocol
LABEL DESCRIPTION
Add New
Protocol
Entry
Click this to configure a customized service.
Name This is the name of your customized service.
Description This is a description of your customized service.
Ports/
Protocol
Number
This shows the port number or range and the IP protocol (TCP or UDP) that defines your customized
service.
Modify Click this to edit a customized service.