EasyManuals Logo

ZyXEL Communications LTE5388-M804 User Manual

ZyXEL Communications LTE5388-M804
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
Chapter 7 Wireless
LTE Series User’s Guide
110
7.6 WPS
Use this screen to configure WiFi Protected Setup (WPS) on your Zyxel Device.
WiFi Protected Setup (WPS) allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Select one of the WPS methods and follow the
instructions to establish a WPS connection.Your devices must support WPS to use this feature. We
recommend using Push Button Configuration (PBC) if your device supports it. See Section 7.11.7.3 on
page 126 for more information about WPS.
Note: The Zyxel Device applies the security settings of the main SSID (SSID1) profile to the WPS
wireless connection(see Section 7.2.2 on page 103).
Note: The WPS switch is unavailable if the wireless LAN is disabled.
If WPS is enabled, UPnP will automatically be turned on.
Click Network Setting > Wireless > WPS. The following screen displays. Click this switch and it will turn blue.
Click Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
Add new MAC
address
This field is available when you select Deny or Allow in the MAC Restrict Mode field.
Click this if you want to add a new MAC address entry to the MAC filter list below.
Enter the MAC addresses of the
WiFi devices that are allowed or denied access to the Zyxel
Device in these address fields. Enter the MAC addresses in a valid MAC address format, that is,
six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Figure 76 Add New MAC Address
# This is the index number of the entry.
MAC Address This is the MAC addresses of the WiFi devices that are allowed or denied access to the Zyxel
Device.
Modify Click the Edit icon and type the MAC address of the peer device in a valid MAC address format
(six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to delete the entry.
Cancel Click Cancel to exit this screen without saving.
Apply Click Apply to save your changes.
Table 33 Network Setting> Wireless > MAC Authentication (continued)
LABEL DESCRIPTION

Table of Contents

Other manuals for ZyXEL Communications LTE5388-M804

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ZyXEL Communications LTE5388-M804 and is the answer not in the manual?

ZyXEL Communications LTE5388-M804 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1733 Mbit/s
WLAN data transfer rate (first band)300 Mbit/s
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
4G standardLTE-TDD & LTE-FDD
3G standardsHSPA+, HSUPA, WCDMA
UMTS bands supported850, 900, 1800, 2100 MHz
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
MAC address table64 entries
Security algorithmsWPA, WPA2
Supported network protocolsIPv4/IPv6
Product typeTabletop router
Product colorGrey, White
LED indicatorsLTE, Power, USB, WLAN
Power source typeDC
Power consumption (typical)24 W
CertificationCE, WEEE, RoHS, HSF
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45), Phone (RJ-11)
Package typeBox
Package depth170 mm
Package width247 mm
Package height120 mm
Package weight1600 g
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Width100 mm
Height205 mm
Weight599 g

Related product manuals