Chapter 17 Voice
LTE Series User’s Guide
219
17.4 Phone
Use this screen to configure settings that depend on which region of the world the Zyxel Device is in.
Selecting the region where the device is physically located improves the quality of phone calls. To
access this screen, click Voice > Phone.
Figure 162 Voice > Phone
The following table describes the labels in this screen.
Note: You need to reboot the device after changing the region settings for it to take effect.
17.5 Call Rule
Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial entries if
you want to call SIP numbers that contain letters. Once you have configured a speed dial rule, you can
use a shortcut (the speed dial number, #01 for example) on your phone's keypad to call the phone
number. To access this screen, click Voice > Call Rule.
OK Click this to save your changes.
Cancel Click this to exit this screen without saving.
Table 86 Voice > SIP > SIP Service Provider: Edit (continued)
LABEL DESCRIPTION
Table 87 Voice > Phone
LABEL DESCRIPTION
Region Setting Select the place in which the Zyxel Device is located.
Call Service Mode Select the mode for supplementary phone services (call hold, call waiting, call
transfer and three-way conference calls) that your VoIP service provider supports.
• Europe Type - use supplementary phone services in European mode.
• USA Type - use supplementary phone services American mode.
You might have to subscribe to these services to use them. Contact your VoIP
service provider.
Apply Click this to save your changes and to apply them to the Zyxel Device.
Cancel Click this to set every field in this screen to its last-saved value.