3Com Switch 4500 26-Port User Manual

250 CHAPTER 15: SYSTEM MAINTENANCE AND DEBUGGING
Displaying the State
and Information of
the System
The display commands can be classified as follows according to their functions.
■ Commands for displaying the system configuration information
■ Commands for displaying the system running state
■ Commands for displaying the system statistics information
For the display commands related to each protocol and different ports, refer to
the relevant chapters. The following
display commands are used for displaying
the system state and the statistics information.
Configuration agent is one of the XRN features. You can log into one Switch of
the Fabric to configure and manage the Fabric. The functions of the configuration
agent include:
■ Distributing configuration commands to the right destination Switches or
processing modules based on the resolution result of the commands input.
■ Sending output information of the commands from the Switch you have
logged into to your terminal.
■ Supporting simultaneous configuration of multiple users.
You cannot configure the configuration agent, but can view the statistics of the
configuration agent.
Perform the following operations in all views.
Table 272 The Display Commands of the System
System Debugging
Enable/Disable the
Terminal Debugging
The Switch provides various ways for debugging most of the supported protocols
and functions, which can help you diagnose and address the errors.
The following Switches can control the outputs of the debugging information:
■ Protocol debugging Switch controls the debugging output of a protocol.
■ Terminal debugging Switch controls the debugging output on a specified user
screen.
Operation Command
Display the system clock display clock
Display the system version display version
Display the saved-configuration display saved-configuration
Display the current-configuration display current-configuration [
controller | interface interface-type [
interface-number ] | configuration [
configuration ] ] [ | { begin | exclude |
include } regular-expression ]
Display the state of the
debugging
display debugging [ interface {
interface-name | interface-type
interface-number } ] [ module-name ]
Display statistics of the
configuration agent
display config-agent unit-id unit-id

3Com Switch 4500 26-Port Specifications

General

Brand	3Com
Model	Switch 4500 26-Port
Category	Switch
Language	English