3Com Switch 4500 26-Port User Manual

Configuring Voice VLAN with a PC Downstream from Phone 71
packet-filter inbound link-group 4999 rule 0
#
interface Ethernet1/0/23
poe enable
stp edged-port enable
broadcast-suppression PPS 3000
priority trust
packet-filter inbound link-group 4999 rule 0
#
interface Ethernet1/0/24
poe enable
stp edged-port enable
broadcast-suppression PPS 3000
priority trust
packet-filter inbound link-group 4999 rule 0
#
interface GigabitEthernet1/0/25
#
interface GigabitEthernet1/0/26
#
interface GigabitEthernet1/0/27
shutdown
#
interface GigabitEthernet1/0/28
shutdown
#
sysname 4500
undo xrn-fabric authentication-mode
#
interface NULL0
#
rip <----- Dynamic Routing setup (only required if deploying L3 network)
undo summary
network 10.0.0.0
network 50.0.0.0
#
voice vlan 50 enable<----------- Set Vlan 50 as the Voice Vlan
#
snmp-agent
snmp-agent local-engineid 8000002B0012A99298C06877
snmp-agent community read public
snmp-agent community write private
snmp-agent sys-info version all
#
user-interface aux 0 7
authentication-mode scheme
user-interface vty 0 4
authentication-mode scheme
#
return
Voice VLAN in Manual
Mode
This section provides a configuring Voice VLAN in manual mode. The lines in red
are important for voice vlan configuration.
Undo voice vlan mode auto
#
interface Ethernet1/0/6
poe enable
stp edged-port enable
port link-type hybrid<--------------- Setup for Hybrid ports
port hybrid vlan 50 tagged
port hybrid vlan 5 untagged

3Com Switch 4500 26-Port Specifications

General

Brand	3Com
Model	Switch 4500 26-Port
Category	Switch
Language	English