3Com Switch 4500 26-Port User Manual

284 CHAPTER 16: SNMP CONFIGURATION
Creating/Updating View
Information or Deleting
a View
You can use the following commands to create, update the information of views
or delete a view.
Perform the following configuration in System View.
Table 324 Create/Update View Information or Deleting a View
Setting the Size of SNMP
Packet Sent/Received by
an Agent
You can use the following commands to set the size of SNMP packet sent/received
by an agent.
Perform the following configuration in System View.
Table 325 Set the Size of SNMP Packet sent/received by an Agent
The agent can receive/send the SNMP packets of the sizes ranging from 484 to
17940, measured in bytes. By default, the size of SNMP packet is 1500 bytes.
Enabling/Disabling a
Port Transmitting Trap
Information SNMP
Agent
To enable/disable a port transmitting trap information SNMP Agent. Perform the
following configuration in Ethernet Port View.
Table 326 Enable/Disable a Port Transmitting Trap Information SNMP Agent
Disabling SNMP Agent To disable SNMP Agent perform the following configuration in System View.
Table 327 Disable SNMP Agent
If user disable NMP Agent, it will be enabled whatever snmp-agent command is
configured thereafter.
Displaying and
Debugging SNMP
After the above configuration, execute the display command in all views to
display the running of the SNMP configuration, and to verify the effect of the
configuration.
Execute the debugging command in User View to debug SNMP
configuration.
Operation Command
Create/Update view information snmp-agent mib-view { included |
excluded } view-name oid-tree
Delete a view undo snmp-agent mib-view view-name
Operation Command
Set the size of SNMP packet sent/received
by an agent
snmp-agent packet max-size
byte-count
Restore the default size of SNMP packet
sent/received by an agent
undo snmp-agent packet max-size
Operation Command
enable current port to transmit the trap information enable snmp trap updown
disable current port to transmit the trap information undo enable snmp trap updown
Operation Command
Disable snmp agent undo snmp-agent

3Com Switch 4500 26-Port Specifications

General

Brand	3Com
Model	Switch 4500 26-Port
Category	Switch
Language	English