SFTP Service 331
Enter password:
*********************************************************
* All rights reserved (1997-2004) *
* Without the owner's prior written consent, *
*no decompiling or reverse-engineering shall be allowed.*
*********************************************************
<3Com>
Employ RSA public key authentication mode, and start using the
corresponding encryption algorithm configured.
[3Com] ssh2 10.165.87.136 22 perfer_kex dh_group1 perfer_ctos_cipher
des perfer_stoc_cipher 3des perfer_ctos_hmac md5 perfer_stoc_hmac
md5
Please input the username: client003
Trying 10.165.87.136...
Press CTRL+K to abort
Connected to 10.165.87.136...
The Server is not autherncated.Do you continue access it?(Y/N):y
Do you want to save the server's public key?(Y/N):y
*********************************************************
* All rights reserved (1997-2004) *
* Without the owner's prior written consent, *
*no decompiling or reverse-engineering shall be allowed.*
*********************************************************
<3Com>
SFTP Service
SFTP Overview Secure FTP (SFTP) is a new feature introduced in SSH 2.0.
SFTP is established on SSH connections, which makes remote users able to securely
log in to the switch and perform file management and transfer operations such as
system upgrade, and thereby providing higher security for data transfer. At the
same time, since the switch can be used as a client, users can log in to remote
devices to transfer files securely.
SFTP Server
Configuration
SFTP server configuration tasks are described in this section:
SFTP server configuration
1 Configuring the service type to be used
Use this configuration task to set the SSH service type to be used. Perform the
following configuration in system view.
No Configuration Item Command View Description
1 Configure the service
type to be used
ssh user
service-type
System view Optional
2 Start the SFTP server sftp server enable System view Required
To Next Page
Loading...
Need help?
General