3 Maintenance
3.1. Introduction
1293HAC023082-001 Revision: E
© Copyright 2004-2008 ABB. All rights reserved.
3 Maintenance
3.1. Introduction
Structure of this chapter
This chapter details all maintenance activities recommended for the robot and any external
units of the robot.
It is based on the maintenance schedule, located in the beginning of the chapter. The schedule
contains information about required maintenance activities including intervals and refers to
procedures for the activities.
Each procedure contains all information required to perform the activity, e.g. required tools
and materials.
The procedures are gathered in different sections, divided according to the maintenance
activity.
Safety information
Before any service work is commenced, it is extremely important that all safety information
is observed!
There are general safety aspects that must be read through, as well as more specific safety
information that describe danger and safety risks when performing the procedures. Read the
chapter Safety on page 17 before performing any service work.
To Next Page
Loading...
Need help?
General