2.3 Responsibilities for the owner
The owner is the person who runs the EVSE for commercial or business purposes
for itself or leaves it to a third party for use. During operation the owner bears legal
responsibility for the protection of the user, other employees or third parties, which
includes the following:
• To know and implement the applicable laws and rules.
• To identify the hazards and do a risk assessment prior to commercing work that
result from the working conditions on the site.
• To operate the EVSE with the protective devices installed.
• To make sure that all protective devices are installed after installation or
maintenance work.
• To make an emergency plan that instructs people what to do in the event of an
emergency relating to the EVSE or to another site emergency.
• To make sure that all employees, the owner and third parties are qualified
according to the applicable local laws and/or rules to do the work.
• To make sure that there is sufficient space around the EVSE to safely do
maintenance and installation activities.
• To identify a site operator who is responsible for the safe operation of the EVSE
and for the coordination of all work, if the owner does not do these tasks.
Note: For German users, notes on the measurement accuracy according
to the sample test certificate apply. Refer to section 11.2.
2.4 Required qualifications for the installation engineer
• The qualified installation engineer fully knows the EVSE and its safe installation.
• The installation engineer is qualified according to the applicable local rules to do
the work.
• The qualified installation engineer obeys all local rules and the instructions in
the installation procedures in the operation and installation manual.
Safety
9AKK108467A6398-EN | 002 15
To Next Page
Loading...
Need help?
General
