APRILIA SHIVER 900 User Manual

•
Apply the flywheel to the crankshaft.
•
Apply the screw and the washer with-
out tightening.
•
Position the appropriate tool to lock the
flywheel in place.
•
Holding the flywheel still using the ap-
propriate tool, tighten the screw on the
crankshaft.
•
Remove the special tool.
Specific tooling
020713Y Flywheel extractor
•
Position the retention plate.
•
Tighten the screw.
Engine SHIVER 900
ENG - 220

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)