APRILIA SHIVER 900 User Manual

BEFORE REMOVING THE BIG END COVERS, CAREFULLY CLEAN THE SURFACES OF THE BIG
END AND THE COVER.
CAUTION
REPLACE THE FOUR RUBBER INSERTS AND THE GASKET EACH TIME THE BIG END COVER
IS REMOVED.
CAUTION
BEFORE REMOVING THE BIG END COVERS, CAREFULLY CLEAN THE SURFACES OF THE BIG
END AND THE COVER.
•
Apply THREEBOND around the perim-
eter of the big end cover along the
gasket housings.
•
Apply THREEBOND to the head at the
points indicated in figure.
•
In order to complete the remaining operations, repeat the removal procedure in reverse
order.
Engine SHIVER 900
ENG - 262

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)