SCHEDULED MAINTENANCE TABLE RESERVED FOR THE USA-LATAM MARKET
I: INSPECT AND CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY
C: CLEAN, R: REPLACE, A: ADJUST, L: LUBRICATE
(1) Check and clean, adjust or replace, if necessary, every 1000 Km (621 mi)
(2) Replace every 2 years
(3) Replace every 4 years
(4) At each engine start
(5) Check every month
(6) Check at every change of the rear tyre
(7) Replace at whichever of the following occurs first: 40,000 km (24,854 mi) or 4 years
(8) Check before each trip.
SCHEDULED MAINTENANCE TABLE
km x 1,000 (mi x 1,000) 1 (0.6) 10 (6.2) 20 (12.4) 30 (18.6) 40 (24.9)
Rear shock absorber (bearings) I I
Spark plug R R
Drive chain (1) I I I
Steering bearings and steering clearance I I I
Wheel bearings - Wheels I I
Diagnosis by tool I I I I I
Brake discs - Brake pads wear (8) I I I
Air filter I R I R
Engine oil filter R R R
Fork I I
General operation of the vehicle I I I
Valve clearance A A
Cooling system I I
Braking systems I I I
Light circuit I I I
Safety switches (stand, stop, clutch, extra negative stroke, gas
control)
I I I I I
Clutch control fluid (2) I I I
Brake fluid (2) I I I
Coolant (2) I I I
Fork oil (7) R
Engine oil R I R I R
Headlight aiming I I
Fork oil seals I
Flexible couplings (6) I I
Tyres - pressure/wear (5) I I I I I
Bolts and nuts tightening I I I
Suspension and setting I I I
Fault indicator light on dashboard (4)
Fuel lines (3) I I
Clutch wear I I
Labour time (minutes) 80 70 230 70 320
NOTE
AT EACH SCHEDULED MAINTENANCE MUST BE VERIFIED WITH THE DIAGNOSTIC TOOL IF
THERE ARE ERRORS AND THE IF THE PARAMETERS ARE CORRECT.
Maintenance SHIVER 900
MAIN - 66
To Next Page
Loading...
Need help?
General
