APRILIA SHIVER 900 User Manual

•
Remove the clutch bell.
•
Retrieve the spacer and the roller bear-
ings.
•
Retrieve the shim.
Checking the clutch plates
•
Lay the friction discs and steel discs on
a level surface and check them for
cracks and potential distortions.
Maximum distortion allowed: 0.20 mm (0.0079
in)
•
Measure the driving plate thickness at
four positions, replace them all if not
complying with specifications.
CAUTION
THE STEEL DISCS MUST SHOW NO SCORES OR TEM-
PERING COLOUR.
Engine SHIVER 900
ENG - 228

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)