APRILIA SHIVER 900 User Manual

Seat
•
Rest the vehicle on its stand.
•
Insert the key (1) in the lock.
•
Turn the key (1) anticlockwise, pull out
and lift the saddle (2).
There is a handy document/tool kit compartment
in the vehicle tail fairing. Remove the saddle (2) to
reach it.
To lock the saddle (2):
•
Move the saddle (2) so that the front
retainers fasten correctly.
•
Press on the middle of the saddle (2),
at the rear fasteners, to insert them
correctly.
•
Press down and push the saddle (2)
forwards, engaging the lock.
CAUTION
BEFORE LOWERING AND LOCKING THE SADDLE,
CHECK THAT THE KEY HAS NOT BEEN LEFT IN THE GLO-
VEBOX / TOOL KIT COMPARTMENT.
BEFORE SETTING OFF, MAKE SURE THAT THE SADDLE
IS CORRECTLY LOCKED INTO POSITION.
SHIVER 900 Bodywork
BODYW - 401

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)