APRILIA SHIVER 900 User Manual

Steering bearing
STEERING
Pos. Description Type Quantity Torque Notes
1 Headstock ferrule (pre-tightening) M25 1 50 Nm (36.88 lb ft) Steering assembly
settling
1 Headstock ferrule (tightening) M25 1 15 Nm (11.06 lb ft) -
2 Flanged upper steering plate fasten-
ing nut (stop)
M22 1 25 Nm (18.44 lb ft) -
2 Flanged upper steering plate fasten-
ing nut (pre-tightening)
M22 1 25 Nm (18.44 lb ft) Loct. 243
2 Flanged upper steering plate fasten-
ing nut (tightening)
M22 1 25 Nm (18.44 lb ft) -
3 Cyl. head, hex. socket screws used
for fastening the fork stanchions to
the upper plate
M8x30 2 25 Nm (18.44 lb ft) -
4 Low profile, cyl. head, hex. socket
screw used for fastening the steering
headstock to the upper plate
M8x30 1 25 Nm (18.44 lb ft) -
5 Cyl. head, hex. socket screws used
for fastening the fork stanchions to
the lower plate
M8x35 4 25 Nm (18.44 lb ft) -
6 Cyl. head, hex. socket screws for fas-
tening the lower U-bolt to the upper
steering plate
M10x60 2 50 Nm (36.88 lb ft) Loct. 243
Suspensions SHIVER 900
SUSP - 312

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)