APRILIA SHIVER 900 User Manual

Removing the
rear wheel
•
Working on the right side, unscrew and
remove the swingarm bolt.
UPON REMOVING THE REAR SWINGARM PAY ATTEN-
TION NOT TO JAM THE GEARING CHAIN.
See also
Removing the
rear wheel
Drive chain
Removing
The transmission chain, although "closed", has a
different coloured hammerlock (where provided),
which should be used to perform opening / disas-
sembling procedures.
NOTE
WHERE PRESENT, THE HAMMERLOCK (1) MAY ALSO BE
IDENTIFIED BY A SIGN (2) APPLIED IN THE MOUNTING
LINES DURING MANUFACTURING.
SHIVER 900 Chassis
CHAS - 331

APRILIA SHIVER 900 Specifications

General

Displacement	896.1 cc
Transmission	6-speed
Rear Brakes	240 mm disc, single-piston caliper
Engine Type	V-Twin, 4-stroke
Power	70 kW (95.2 hp) @ 8, 750 rpm
Torque	90 Nm at 6, 500 rpm
Fuel System	Electronic fuel injection
Front Suspension	Inverted fork with adjustable preload and rebound damping
Rear Suspension	Aluminum swingarm with adjustable rebound and preload
Front Brakes	Dual 320 mm discs, radial 4-piston calipers
ABS	Standard
Traction Control	Adjustable traction control
Ride Modes	Sport, Touring, Rain
Seat Height	810 mm
Wheelbase	1, 460 mm
Fuel Capacity	15 liters
Dry Weight	199 kg (439 lbs)